Bulls-Eye Auto Leveling Laser Line & Stud Finder

Take the guess work out of drilling though walls. Laser line automatically levels, stud finder detects studs through walls up to 3/4 in. and rubber overmold provides comfort and grip when using hand held. Hanging pin fastens unit to the wall for hands free convenience, target cones enhance visibility of line at long distances. Protective storage case protects the product during storage and transportation.

Intersect W/Stud Finder

Three Line Laser Level works level and plumb simultaneously. Auto levels and allows access at the intersection of the 3 Laser Lines. 3M Command strips allow to mounting without any surface damage. Automarking, no need for pencils. Includes 3/4 in. Stud Finder with Accuscan technology for precise stud location.

Laser Level Line Generator & Stud Finder

Put the LaserBall 360 laser level on the wall to define your level line, then use the StudSensor SL stud finder to find all the studs along that line to easily hang shelves, pictures, mirrors, and cabinets. LaserBall's unique mounting cup temporarily adheres to most surfaces without damage. StudSensor SL finds wood and metal studs up to 3/4 In. (19 mm) deep behind standard interior drywall.

Laser Stud Finder

Patented, auto-marking feature eliminates need for pens or pencils - Patented auto on/off operation with surface contact - STRAIT-LINE Laser Level fits onto the unit for Laser projection of the stud. Unit auto-calibrates, eliminating the need to hold a button down.

Measure Tech Plus Stud Sensor & Sonic Tape Measure

Deep sensor mode electronically detects wood and metal studs through walls, floors and ceilings up to 1-1/2 in. thick. It also measures distances from 2 ft. to 50 ft. with 99.5% accuracy. It continuousley calculates distance as you walk and figure square or cubit feet for painting, floor and realty estimates. Uses one 9V battery (included).

Measure Tech Plus Stud Sensor & Sonic Tape Measure

Deep sensor mode electronically detects wood and metal studs through walls, floors and ceilings up to 1-1/2 In. thick. It also measures distances from 2 Ft. to 50 Ft. with 99.5% accuracy. It continuousley calculates distance as you walk and figure square or cubit feet for painting, floor and realty estimates. Uses one 9V battery (included).

MultiScanner i700 OneStep

You've never seen anything like it! Zircon's MultiScanner i700 doesn't look or work anything like your old stud finder. With a futuristic new design and patent-pending CenterVision technology that finds the center of the stud with just one pass, MultiScanner i700 sets a new state-of-the-art for scanning.It all starts with a floating scanner head, featuring a bright backlit LCD display and non-marring pads to protect even the most delicate wall finishes. The head locks into fully articulating arms that connect to the handle. Not only is this an ergonomic improvement that allows more flexible movement for the user, it also enhances accuracy by ensuring that the scanner lies flat against the wall if the unit is tilted - a major cause of errors. There's also a new, one-touch, fully erasable EasyMark system so you can mark exactly where to nail or drill.

MultiScanner OneStep

Locates center and edges of studs and joists up to 1 1/2 in. (38 mm) deep and rebar in concrete up to 3 in. (76 mm) deep. Detects and traces hot AC wires. Exclusive CenterVision technology to find the center of studs in one step. Patented SpotLite Pointing System for easy marking reference. Patented DeepScan dual sensitivity scanning. Continuous hot AC WireWarning alert in all modes.

MultiScanner Pro SL

Electronic stud, metal, and AC finder to trace hot wires. Features patented SpotLite Pointing System. Large LCD screen for clarity. Finds both wood and metal studs. Finds metal pipes behind tile and in concrete. Finds conduit, rebar, electrical boxes, exhaust vents and ducting.

Starrett Automatic Center Punch

This automatic centering punch has an exclusive self-centering locating sleeve. Just hold the punch in an upright position, press the handle down, and a built in mechanism strikes a perfect center mark every time. It is the perfect tool for carpenters, cabinetmakers, metalworkers, and home craftsmen.

Starrett Stair Gage Fixture Attachment

A pair of these fixtures clamped to a carpenter's framing or rafter square forms a handy gage for laying out stair stringers, hip, valley, and other rafter cuts plus many other unusual cuts.

Starrett Stair Gage Fixture Attachment - Short

A pair of these fixtures clamped to a carpenter's framing or rafter square forms a handy gage for laying out stair stringers, hip, valley, and other rafter cuts plus many other unusual cuts. The No. 470 has a smaller area that contacts the square blade. It is convenient, small, and lower in cost.

Starrett Thickness Gage with Nine Leaves

These gages are used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, and gaging narrow slots.

Stud Sensor

Stay safe and work smart, as this rubber gripped unit detects wood, metal studs, rebar and live wires hidden behind walls using the deep stud sensor (up to 1-1/2 in. deep for wood and metal studs; 2 in. deep for rebar). Electronically locates wood & metal studs up to 3/4 in. (19mm) depth through walls, floors & ceilings in regular mode. Its large, LCD screen makes for easy reading, while an automatic power-off feature shuts it down if left idle for more than two minutes. Low battery indicator, and it uses a 9V battery. The battery is included.

Stud Sensor

Stay safe and work smart, as this rubber gripped unit detects wood, metal studs, rebar and live wires hidden behind walls using the deep stud sensor (up to 1-1/2 in. deep for wood and metal studs; 2 in. deep for rebar). Electronically locates wood & metal studs up to 3/4 in. (19mm) depth through walls, floors & ceilings in regular mode. Its large, LCD screen makes for easy reading, while an automatic power-off feature shuts it down if left idle for more than two minutes. Low battery indicator, and it uses a 9V battery. The battery is included.

StudSensor

Finds wood and metal studs and joists up to 3/4 in. (19 mm) deep. LED and audio indicators. Over-the-stud correction alert. TruCal instant calibration.

StudSensor DeepScan SL

Securely hang pictures, mirrors, shelves, and hooks the first time... every time! Say goodbye to guesswork and unnecessary holes in your walls. Finds the edges of wood and metal studs and joists up to 1 1/2 in. (38 mm) deep through typical drywall construction. LED and audio indicators indicate the stud edge. Patented SpotLite Pointing System illuminates edge of stud.

StudSensor i65 OneStep

This well-crafted tool uses CenterVision technology to find the center of wood and metal studs and joists up to 1 1/2 In. deep (38 mm) beneath the surface of walls, floors, and ceilings in one simple step. Its easy-to-read LCD display indicates direction, edge, and center of the stud. Also includes AC WireWarning to continuously detect hot AC wiring for safety.

StudSensor Pro SL-AC

Finds wood and metal Studs to 1 1/2 in. (38 mm) deep. Continuous AC WireWarning finds hot AC in any mode. SpotLite Pointing System identifies target. Audio and LED target indicator. TruCal instant calibration. Lights flash when unit is miscalibrated. 9-volt battery included.

StudSensor? Pro SL-AC

Finds wood and metal Studs to 1 1/2 in. (38 mm) deep. Continuous AC WireWarning? finds hot AC in any mode. SpotLite Pointing System identifies target. Audio and LED target indicator. TruCal instant calibration. Lights flash when unit is miscalibrated. 9-volt battery included.

TriScanner Pro

Stud, joist and metal finder with continuous AC detection capability. Finds both wood and metal studs. Finds metal pipes behind tile and in concrete. Finds conduit, rebar, exhaust vents, and ducting. LED arrow display for clarity.

Wall Tech Stud Sensor

This stud finder has LED and audio indication. A built-in 8 ft. tape measure helps position pictures, shelves, and more before hanging. This tool will electronically locate wood and metal studs up to 3/4 in. (19 mm) depth through walls, floors and ceilings and the deep stud sensor mode detects wood and metal studs up to 1-1/2 in. deep. A green light indicates the unit is calibrated and ready for use. The edge of the stud is indicated by top red LED and audio signal.

Wall Tech Stud Sensor

This stud finder has LED and audio indication. A built-in 8 ft. tape measure helps position pictures, shelves, and more before hanging. This tool will electronically locate wood and metal studs up to 3/4 in. (19 mm) depth through walls, floors and ceilings and the deep stud sensor mode detects wood and metal studs up to 1-1/2 in. deep. A green light indicates the unit is calibrated and ready for use. The edge of the stud is indicated by top red LED and audio signal.